| 3D PLATFORM SHAKER |
Because the versatile, variable-speed Platform Shaker can handle a variety of mixing applications, it''s a great choice for any laboratory.- Shaking action from gentle rocking to firm 3D shaking.
- Delivers results for the following applications:hybridizations- DNA extraction - immunoays - staining and destaining of gels - mixing of blood samples - reconstituting antibiotics - medical and industrial
- Comes with metallic rack and non-slip rubber pad.
Contact the factory for special applications. Specifications
Size: 13"w x 10"d x 11-3/4"h.
Speed Range: 0-82 rpm.
Electrical Rating: 50/60HZ, 120V & 240V.
Electrical: 6-ft., 3-wire grounded cord.
Load Weight Capacity: Maximum of 20 lbs. | |
| Catalog Number | Description | Product Weight (lbs) | | 099A TDS112 | 3D Platform Shaker, 120 volts | 3.2 | | 099A TDS124 | 3D Platform Shaker, 240 volts | 3.2 | | 099A TDS100 | Multi-tier platform | 1.0 |
|
|
MID-RANGE 3D SHAKER
The Mid-Range 3D Shaker gives you the same convenient, consistent 3D shaking on your bench as you get with our 3D Floor Shaker.
- Mechanically shakes glware for consistent, repeatable results.
- Fits in fume hood to protect personnel from fumes. (Minimum 30"d x 36"l x 36"h for 2-liter sep funnels; 24"d x 72"l x 36"h for sizes up to 1-liter).
- Handles total loads up to 40 lbs without needing to balance load.
- "Lazy Susan" design allows 360° rotating of platform for easy loading and unloading.
- Platform locks in place for added safety.
- Accommodates up to four 2-liter separatory funnels.
- Glas-Col''s automatic venting separatory funnels ailable for added safety.
|
Specifications
Motor: 1/4-hp continuous-duty motor.
Load Weight Capacity: Maximum of 40 lbs. (18.1 kg).
Electrical: Power switch, circuit breaker, pilot light, and 6-ft., 3-wire cord. Dial speed and countdown interval timers.
Electrical Rating: 660 volt-amps.
Size: Shaker base dimensions-22"d x 17"w (55.9 x 43.2 cm). Height to platform 14" (35.6 cm). Octagonal platform-19" (48.3 cm) across corners.
Finish: Foxtip gray and charcoal.
RS232: Port can be used with LabNetix software. |
| Catalog Number | Description | Input
Voltage | RPM | Product
Weight
(lbs) | | *099A VS20012 | Shaker base only | 120V | 10-170 | 165.0 | | *099A VS20024 | Shaker base only | 240V | 10-170 | 165.0 | | 099A VS21012 | Shaker base w/four 1-liter separatory funnel holders | 120V | 10-170 | 165.0 | | 099A VS21024 | Shaker base w/four 1-liter separatory funnel holders | 240V | 10-170 | 165.0 | | 099A VS22012 | Shaker base w/four 2-liter separatory funnel holders | 120V | 10-170 | 165.0 | | 099A VS22024 | Shaker base w/four 2-liter separatory funnel holders | 240V | 10-170 | 165.0 |
*Note: Glware holders not included. Order separately. |
|
FUNNEL OR FLASK HOLDER |
Each separatory funnel holder will hold one funnel, and you can use up to four holders which mount to the platform without fasteners.
While the rear support of the funnel holder remains stationary, the front part holding the funnel can be released and rotated 360°. This permits the funnel to be filled, inverted for shaking, and then reinverted for addition and/or extraction, all while the flask remains in the holder. This also helps to eliminate breakage of glware caused by handling.
When using standard funnels with gl, plastic, or Teflon® spers, our sper retainers are required. Gas pressure can be released by inverting the funnel and shaking with the scock open. Gas pressure can also be released automatically by using Glas-Col''s patentedVentSepseparatory funnels (see Shaker Glware section). The Erlenmeyer flask holder will hold a single flask and the volumetric flask holder will hold one flask. |
| Catalog Number | Description | Height (in) | Width (in) | Depth (in) | Product Weight (lbs) | | 099A VH0250S | Holder for 250-ml separatory funnel | 11.0 | 7.00 | 8.25 | 5.5 | | 099A VH0500S | Holder for 500-ml separatory funnel | 11.0 | 7.00 | 8.25 | 5.5 | | 099A VH1000S | Holder for 1000-ml separatory funnel | 11.0 | 7.00 | 8.50 | 5.5 | | 099A VH2000S | Holder for 2000-ml separatory funnel | 11.0 | 7.25 | 9.50 | 5.5 | | 099A VH0250E | Holder for 250-ml Erlenmeyer flask | 11.0 | 7.25 | 9.00 | 5.5 | | 099A VH0500E | Holder for 500-ml Erlenmeyer flask | 11.0 | 7.25 | 9.25 | 5.5 | | 099A VH1000E | Holder for 1000-ml Erlenmeyer flask | 11.0 | 7.00 | 10.00 | 5.5 | | 099A VH1000V | Holder for 1000-ml volumetric flask | 11.0 | 7.00 | 8.50 | 5.5 | | 099A VH2000V | Holder for 2000-ml volumetric flask | 11.0 | 7.25 | 8.50 | 5.5 |
|
|
| 3D FLOOR SHAKER | |
This shaker eliminates time-consuming and tiring shaking of large vessels by hand.
- Vigorously shakes large separatory funnels.
- 3D motion circulates liquid up, down, sideways, and around for effective mixing.
- Excellent for hemolyzing blood, water pollution ysis, or drug ysis.
- Shakes up to eight 2-liter funnels; no balancing required.
- Rack design minimizes strain on drains and scocks and reduces the possibility of broken glware.
- Can be adapted to accommodate other tes of vessels.
Consult factory for special applications.
Specifications
Load Weight Capacity: 80 lbs. (36.3 kg).
Electrical: Features a power switch, circuit breaker, and 6-ft,3-wire cord. Dial speed and countdown interval timers.
Electrical Rating: 660 volt-amps.
|
Mounting: Adjustable mounting feet provided.
Size: Base dimensions of 27-1/4"w x 30-1/4"d x 26"h (69 x 77 x 66 cm). Platform working height of 36" (91.4 cm).
RS232: Port can be used with LabNetix software.
|
| Catalog Number | Description | Input
Voltage | RPM | Product
Weight
(lbs) | | 099A VS50012 | Shaker base only | 120V | 10-170 | 165.0 | | 099A VS50024 | Shaker base only | 240V | 10-170 | 165.0 | | 099A VS5503 | Shaker base w/Eight 1-liter separatory funnel holders | 120V | 10-170 | 165.0 | | 099A VS550324 | Shaker base w/Eight 1-liter separatory funnel holders | 240V | 10-170 | 165.0 | | 099A VS5504 | Shaker base w/Eight 2-liter separatory funnel holders | 120V | 10-170 | 165.0 | | 099A VS | Shaker base w/Eight 2-liter separatory funnel holders | 240V | 10-170 | 165.0 |
|
| Catalog Number | Description | Height (in) | Width (in) | Depth (in) | Product Weight (lbs) | | 099A VH1000DS | Double holder for 1 liter separatory funnel | 11.0 | 14.00 | 8.25 | 9.0 | | 099A VH2000DS | Double holder for 2 liter separatory funnel | 11.0 | 14.50 | 8.25 | 9.0 | | 099A VH1000DV | Double holder for 1 liter volumetric flask | 11.0 | 14.00 | 8.50 | 9.0 | | 099A VH2000DV | Double holder for 1 liter volumetric flask | 11.0 | 14.50 | 9.50 | 9.0 |
|
