| 類型 | 數顯電流測量?jī)x表 | 品牌 | 華儀 |
| 型號 | 7630 | 測量范圍 | 0-20mA(rms)（A） |
| 準確度 | 2% | 功率 | -（W） |
| 電源電壓 | 115/230 VAC &plun; 15%（V） | 外形尺寸 | 430 (W) x 133(H) x 300 (D)（mm） |
| 特點： | |
| 六合一功能包含 (ACW,DCW,IR,GB,LLT,RUN TT) | |
| 型320&tim;240 Graphic LCD 視窗 | |
| 可於同一畫面下完整的顯示的設定參數或量測數值 | |
| 測試功能確認設定(Verification) | |
| 自動提示訊息功能(Prompt) | |
| 快速放電線路 (專利:104990) | |
| 可設定校正日期-時間的預警功能 | |
| 內建50組程式記憶 每一組30個測試步驟，可於設定連續測試 | |
| 全範圍電壓輸出穩壓率在1%以?xún)?nèi) | |
| 鍵盤鎖定功能 | |
| 內含高壓觸電線路art GFI (專利:169000) | |
| 簡單易懂的人機界面 | |
| 緩昇上限(Ramp High)設定(專利:100859) | |
| 充電下限(Charge Low)設定 (專利:106128) | |
| 內建PLC Remote遙控界面 | |
| 可外接標準GPIB/RS-232界面作控制 | |
| 備有小電流接地阻檢查功能(Continuity) | |
| 量測速度快，準確度高 | |
| 可選購SPACE-9170安規自動化測試軟體 經由個人電腦PC作控制 | |
| Specification : | ||
| INPUT | ||
| Voltage | 115/230 VAC &plun; 15% | |
| Frequency | 50/60 Hz &plun; 5% | |
| Fuse | 2A Slow-Blo 250V AC | |
| Line condition | ||
| Power Switch | Reverse polarity switch for rmal condition (on / off / auto setting) | |
| Neutral Switch | Neutral switch on/off selection for single fault condition | |
| Ground Switch | Ground switch on/off selection for cl I single fault condition | |
| Probe Setting | ||
| Surface to Surface (PH- PL) | ||
| Surface to Line(PH - L) | ||
| Ground to Line (G - L) | ||
| Ground to Neutral (G - N) | ||
| Auto Function (G - N & G - L) | ||
| SETTING | ||
| Touch Current High Limit (RMS) | Range: | 0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA |
| Rolution: | 0.1uA/1uA/0.01mA | |
| Touch Current Low Limit (RMS) | Range: | 0.0-999.9 uA |
| Rolution: | 0.1uA | |
| Touch Current High Limit (Peak) | Range: | 0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA |
| Rolution: | 0.1uA/1uA/0.1mA | |
| Touch Current Low Limit (Peak) | Range: | 0.0-999.9 uA |
| Rolution: | 0.1uA | |
| DISPLAY | ||
| Touch Current Display (RMS) | Range 1 | 0.0uA~ 999.9uA, frequency DC - 1MHz |
| Rolution | 0.1uA | |
| Accuracy | DC : &plun;2% of reading + 3counts 15Hz < f <100KHz : &plun;2% of reading + 3counts 100KHz < f < 1MHZ : &plun;5% of reading (10.0uA - 999.9uA) | |
| Range 2 | 1000uA~8500uA, frequency DC - 1MHz | |
| Rolution | 1uA | |
| Accuracy | DC : &plun;2% of reading + 3counts 15Hz < f <100KHZ : &plun;2% of reading + 3counts 100KHz < f <1MHZ : &plun;5% of reading (10uA - 8500uA) | |
| Range 3 | 8.00mA~20.00mA, frequency DC - 1MHz | |
| Rolution | 0.01mA | |
| Accuracy | DC : &plun;2% of reading + 3counts 15Hz < f < 1MHz : &plun;5% of reading (0.01mA -20.00mA ) | |
| Touch Current Display (Peak) | Range 1 | 0.0uA~ 999.9uA, frequency DC - 1MHz |
| Rolution | 0.1uA | |
| Accuracy | DC : &plun;2% of reading +2uA 15Hz < f <1MHZ : &plun;10% of reading +2uA | |
| Range 2 | 1000uA ~ 8500uA, frequency DC - 1MHz | |
| Rolution | 1uA | |
| Accuracy | DC : &plun;2% of reading +2counts 15Hz < f <1MHz : &plun;10% of reading +2counts | |
| Range 3 | 8.0mA ~ 30.0mA, frequency DC - 100KHz | |
| Rolution | 0.01mA | |
| Accuracy | DC : &plun;2% of reading +2counts 15Hz < f < 100KHz : &plun;10% of reading +2counts | |
| Measuring Device Module | ||
| MD1 | IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010 | |
| IEC60990 Fig4 U1, IEC60065 | ||
| MD2 | IEC60990 Fig5 U3, IEC60598-1 | |
| IEC60990 Fig5 U1 | ||
| MD3 | IEC 60601-1 | |
| MD4 | UL544NP, UL484 , UL923, UL471, UL867, UL697 | |
| MD5 | UL544P | |
| MD6 | UL1563 | |
| MD7 | IEC60950, IEC61010-1 FigA.2 (2K ohm) for RUN Tt MD Circuit. | |
| External MD | Basic measuring element 1k ohm | |
| MD Voltage Limit | 70Vdc | |
| Leakage Current Offset | Range: | 0 - 999.9uA |
| Rolution: | 0.1uA | |
| DUT POWER | ||
| AC Voltage | 0.0-277.0V | |
| AC Current | 40Arms max continuous | |
| Over Current Protection | 50Arms, Rponse Time < 3 sec / 250Apeak Rponse Time <10u sec | |
| AC Voltage High/Low Limit | Range: | 0.0-277.0V |
| Rolution: | 0.1V/step | |
| AC Voltage Display | Range: | 0.0 - 277.0 V |
| Rolution: | 0.1 volt / step | |
| Accuracy: | &plun;(1.5% of reading + 2 counts) , 30.0 - 277.0VAC | |
| Delay time setting | Range: | 0.2 !V 999.9 seconds |
| Rolution: | 0.1 second | |
| Timer display | Range: | 0.0 !V 999.9 seconds |
| Rolution: | 0.1 second | |
| Accuracy: | &plun; (0.1% of reading + 0.05 seconds) | |
| GENERAL | ||
| PLC Remote Control | Input - Tt, Ret, Interlock & Recall File 1 through10 | |
| Output - P, Fail, Tt-in-Procs, Start-Out, Ret-Out | ||
| Scanner Control | It is applied to control Matrix Scanner (Model 7006) | |
| Memory | 50 memori , 30steps per each memory . Max. Rult Display 900 data (30 memori x 30 steps) | |
| Auto Reverse Function | AUTO Reverse ON / OFF parameter setting selection Automatic Reverse polarity switch for rmal condition in one step setting menu. Only display maximum leakage current value. | |
| Scope Output Interface | At rear panel BNC te to connet scope for some IEC standards tt requirement and application. | |
| Display | 320 X 240 graphic LCD | |
| LCD Contrast Setting | Range: 1-9; 1 is lightt character, 9 is darkt character. | |
| Alarm Volume Setting | Range: 0-9; 0=OFF, 1 is softt volume, 9 is loudt volume. | |
| Security | Lockout capability to avoid unauthorized accs to tt set-up programs. | |
| Calibration | Software and adjustments are made through front panel, Automatic Calibration alert function to signal operator when calibration is due. | |
| Rults Display | All tt rult information will be displayed on the screen. | |
| Interface | RS232 standard | |
| Safety | Product with TUV/GS certificate | |
| Dimension | 430 (W) x 133(H) x 300 (D) mm | |
| Weight | 12 Kg | |
| STANDARD ACCSORI | ||
| Power Cord | X1 | |
| Fus | X2 (Including a spare contained in the fuse holder) | |
| Interlock Disable Key(1505) | X1 | |
| TC Receptacle Adaptor Box (1932) | X1 | |
| Hipot Tt Lead for PH / PL (1101) | X2 | |
| RS232 Link Cable 1.5m(1130) | X1 | |
| DUT Power Cable 40A(1148) | X1 | |
| RUN Module (Opt.752) | ||
| W | Range : 0-1KW / 1-10KW Rolution : 0.5W / 5W | |
| A | Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Rolution : 0.001A / 0.01A | |
| PF | 0.000 -1.000 | |
| Leakage Current | Range : 0.00 - 10.00mA , Rolution : 0.01mA | |
| AC Current High/Low Limit Setting | Range: | 0-40A |
| Rolution: | 0.01A/step | |
| AC Current Display | Range: | 0.000 !V 3.500 A / 3.00 - 40.00A |
| Rolution: | 0.001A / 0.01A | |
| Accuracy : | &plun; (2 % of reading + 5 counts) / &plun; (2 % of reading + 2 counts) | |
| AC Power High/Low Limit Setting | Range: | 0 - 10KW |
| Rolution: | 1W | |
| AC Power Display | Range: | 0.0 -1000.0W / 1000 - 10000W |
| Rolution: | 0.5W / 5W | |
| Accuracy : | &plun;(2 % of reading + 2 counts ) | |
| Power Factor High/Low Limit Setting | Range: | 0.000 - 1.000 |
| Rolution: | 0.001 | |
| Power Factor Display | Range: | 0.000 - 1.000 |
| Rolution: | 0.001 | |
| Accuracy : | &plun; (2 % of reading + 2 counts ) | |
| Leakage Current High/Low Limit Setting | Range: | 0.00 - 10.00mA |
| Rolution: | 0.01mA | |
| Leakage Current Display | Range: | 0.00 - 10.00mA |
| Rolution: | 0.01mA | |
| Accuracy : | &plun; (2 % of reading + 2 counts ) | |
| Delay Timer Setting | Range: | 0, 0.2 - 999.9 |
| Rolution: | 0.1 | |
| Dwell Timer Setting | Range: | 0, 0.1-999.9 (0=continuous) |
| Rolution: | 0.1 | |
| Timer display | Range: | 0.0 - 999.9 seconds |
| Rolution: | 0.1 second | |
| Accuracy: | &plun; (0.1% of reading + 0.05 seconds) | |
| Power Control | It is applied to control Transformer Box (1931/1931S) or AC Power Source(6700/6800/6400 Seri) | |
| HV & GB Link Module (Opt. 753) | ||
| Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A | ||
| GPIB Interface Card (Opt. 731) | ||
| Printer Port Interface Card (Opt. 732) | ||
| Multi-function Interface Card (Opt. 751) | ||
| Including U port A te, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability. | ||
| High Measurement Range 35mArms / 70mApeak & 4MDs (Opt. 754 ) | ||
| 35mArms / 70mApeak for IEC60990 fig4(U1 and U2), IEC60990 fig5(U1 and U3), UL484, IEC60601 Tt Requiremt , tice : Option this MD circuit have to replace MD module all MD circuits . | ||
| Transformer Box (Option) Add this option must optional Opt.752 RUN Module. | ||
| 1931 Seri Transformer Box (500VA/ 1KVA/1.8KVA/3.6KVA) | Multi-Tape of 1.0, 1.06, 1.1 tim of input voltage. | |
| 1931-S Seri Transformer Box (500VA/ 1KVA/1.8KVA/3.6KVA) | Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 tim of input voltage. | |
| AC Power Source (Option) Add this option must optional Opt.752 RUN Module. | ||
| 6800 Seri Dial AC Power Source (6805, 6810 , 6820 , 6830 and 6840 ) | ||
| 6700 Seri Programmable AC Power Source (6705, 6710 , 6720 , 6730 and 6740 ) | ||
| 6400 Seri AC Power Source (6402, 6403, 6405, 6410 ) | ||
