LK-3600核輻射檢測儀|核輻射測量儀|個人劑量報警儀LK3600

LK-3600儀器特點
1、靈敏度高，穩定可靠。
2、超大液晶顯示，并有漢字顯示功能，狀態顯示一目了然。
3、測量射線劑量率，顯示劑量率、累積劑量和存儲累積劑量，有多種劑量率報警閾值可供選擇，根據劑量率大小和要求高低選擇測量時間，一般測量時間選擇02s，測量劑量比較小的本底劑量時請選擇10、20秒。
4、專門設計了本底測試功能，可檢測儀器是否能正常工作，方便自檢和計量部門檢查。
5、具有累積劑量存儲功能，斷電后數據可保存不丟失。
6、功耗低，體積小，攜帶方便。
7、儀器操作簡單，使用方便。

主要技術性能
1、G-M計數管經補償，低能響應得到提高。
2、儀器靈敏度高，對環境本底會有響應。
3、適用輻射場合γ、χ射線。
4、測量范圍：劑量率：0.000usv/h—5msv/h
             累積劑量：6位液晶顯示000.000—999.999msv
5、能響：＜±30%（50KeV—1.3MeV）。
6、相對基本誤差：＜±10%（137Cs 源662 KeVγ輻射1msv/h）。
7、報警響應時間：≤3秒。
8、報警功能
劑量率閾值報警：報警閾值為0.5、1.0、2.5、10、30、50usv/h。
9、本儀器具有累積劑量存儲功能。斷電后存儲器的數據可保存不丟失，可進行100萬次存儲擦除。
10、電池欠壓指示：在儀器液晶右上角顯示電池電壓圖標，電量標示滿三格電池電量大約2.8V-3.2V，電量標示二格電池電量大約2.5V-2.8V，電量標示一格電池電量大約2.1V-2.5V，電量標示無格電池電量在2.1V以下，處于欠電狀態。
11、工作環境要求：溫度：-10 -- +50℃ 濕度：達90%（無冷凝）

LK-3600 personal radiation alarm dosimeter is a kind of small-scale equipment, which is made by new SCM technology, can work in relatively harsh environment, and with strong anti-interference ability. It is mainly used to detect χ rays and γ ray, according to LCD screen you can directly read the "RATE"; "DOSE" and "STORE DOSE". In the range of measurement, the value can be pre-fixed or threshold pre-alarmed, it would emit sound-light alarm when the value displayed exceed the threshold or blocked, prevent workers from being injured by excessive dose. The instrument is low power consumption, multi-function, small size, convenient taking. It is widely used in NDT, nuclear power station, nuclear submarine, isotope application and hospital cobalt treatment etc.

Main Technical Performances
1,Through G-M counter compensation, improve the low-energy response.
2,Instrument with high sensitivity, will respond to the natural environment.
3,For radiation occasions γ, χ rays.
4,Measuring range, dose rate: 0.000usv/h—5msv/h
accumulated dose: 6-digit LCD display 000.000—999.999msv
5,Energy response: <±30% (50KeV—1.3MeV).
6,Relative basic error: ＜±10%(135Cs Source 662 KeV γ Radiation 1msv/h).
7,Alarm response time: ≤3 seconds.
8,Alarm function
Dose rate threshold alarm: alarm threshold value: 0.5,1.0,2.5,10,30,50usv/h.
9,With accumulated dose memory function, after power-failure, data can be stored permanently, it can undertake 1 million times storage and erased.
10,Battery voltage indication.
Icon shows the battery voltage in the upper right corner of instrument LCD, when battery shows three full grids, power is about 2.8V-3.2V, when battery shows two grids, the power is about 2.5V-2.8V, when battery shows one grid, the power is about 2.1 V-2.5V, when battery shows without grid , the power is under 2.1V, it is in the state of less power.
11,Working environment requirements:
Temperature:-10 - +50℃ Humidity: reach 90% (no condensation)

LK-3600
歡迎詳細咨詢

張先生：

QQ咨詢：  發儀器儀表咨詢    謝謝