| 類型 | 臺灣華儀 7100 系列 實用型耐壓/絕緣測試儀 | 品牌 | 臺灣華儀 7100 系列 實用型耐壓/絕緣測試儀 |
| 型號 | 臺灣華儀 7100 系列 實用型耐壓/絕緣測試儀 | 測量范圍 | . |
| 測量 | . | 電源電壓 | .（V） |
| 尺寸 | ..（mm） | 用途 | . |
詳細介紹
特點
體積小(28寬×8.9高×30深cm)、重量輕8.4kg
四種測試順序可供選擇：W,I,W-I,I-W(Only7152,7162)
可與華儀的接地阻抗測試儀7305連結使用
內建10組程序內存
緩升及測試時間可達999.9秒
鍵盤鎖定功能
內建PLCRemote可程序遙控界面
前面板軟件輸入校正
操作簡單
選購信息
編號7100系列耐壓絕緣測試儀-產品及附件
7151ACWithstandVoltageTester
7152ACWithstandVoltage/InsulationResistanceTester
7160AC/DCWithstandVoltageTester
7162AC/DCWithstandVoltage/InsulationResistanceTester
| MODEL | 7151 | 7152 | 7160 | 7162 |
| AC WITHSTAND VOLTAGE | ||||
| Output Rating | 5KVAC/12mA | |||
| Range | Resolution | Accuracy | ||
| Output Voltage, KVAC | 0-5.00 | 0.01 | ±（2% of setting + 5V） | |
| Output Frequency | 50Hz/60Hz ±100ppm, User Selection | |||
| Output Waveform | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 | |||
| Output Regulation | ± (1% of output + 5V), From no load to full load | |||
| SETTINGS | ||||
| Hi-Limit AC Current, mA | 0.10 - 12.00 | 0.01 | ±（2% of setting + 2counts） | |
| Lo-Limit AC Current, mA | 0.00 - 12.00 | 0.01 | ±（2% of setting + 2counts） | |
| Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Dwell Time, second | 0, 0.2 - 999.9 (0=continuous) | 0.1 | ||
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| DC WITHSTAND VOLTAGE (7160,7162 ONLY) | ||||
| Output Rating | 6KVDC/5mA | |||
| Output Voltage, KVDC | 0 - 6.00 | 0.01 | ±（2% of setting + 5V） | |
| Output Ripple | <5%（6KV/5mA at Resistive Load） | |||
| SETTINGS | ||||
| Hi-Limit DC Current, mA | 0.02 - 5.00 | 0.01 | ±（2% of setting + 2counts） | |
| Lo-Limit DC Current, mA | 0.00 - 5.00 | 0.01 | ±（2% of setting + 2counts） | |
| Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Dwell Time, second | 0, 0.2 - 999.9 (0=continuous) | 0.1 | ||
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| Discharge Time | < 200 msec | |||
| INSULATION RESISTANCE (7152,7162 ONLY) | ||||
| Output Rating | 1KVDC/1000MΩ | |||
| Output Voltage, KVDC | 0.10 - 1.00 | 0.01 | ±（2% of setting + 3V） | |
| SETTINGS | ||||
| Hi-Limit Resistance, MΩ | 0, 1 - 1000 (0=OFF) | 1 | ±（3% of setting+2counts）at > 500VDC | |
| Lo-Limit Resistance, MΩ | 1 - 1000 | 1 | ±（7% of setting +2counts）at <500VDC | |
| Delay Time, second | 0, 0.5 - 999.9 (0=continuous) | 0.1 | ±（0.1% + 0.05sec） | |
| MEASUREMENT | ||||
| AC/DC Voltage, KV | 0 - 6.00 | 0.01 | ±（1.5% of reading + 1count） | |
| DC Voltage, KV (IR only) | 0.10 - 1.00 | 0.01 | ±（1.5% of reading + 3V） | |
| AC Current, mA | 0.10 - 12.00 | 0.01 | ±（2% of reading + 2counts） | |
| DC Current, mA | 0.02 - 5.00 | 0.01 | ±（2% of reading + 2counts） | |
| Resistance, MΩ | 1 - 1000 (Auto Range) | 0.001 0.01 0.1 | ±（3% of reading+2counts）at > 500VDC ±（7% of reading +2counts）at <500VDC | |
| GENERAL | ||||
| Input Voltage AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A Fast | |||
| PLC Remote Control | Input : Test , Reset | |||
| Output : Pass , Fail , Processing | ||||
| Memory | 10 Sets Store/Recall of each Memory, 4 Test Mode Selectable （W, I, W～I(xiàn), I～W Only 7152, 7162） | |||
| Display | 16×2 LCD with back light | |||
| Key Lock | To prevent unauthorized alteration of the test Parameters | |||
| Calibration | Build-in software and external calibrated meters | |||
| Environment | 0-40℃, 20-80%RH | |||
| Dimension/Net Weight | 280mm(W)×89mm(H)×300mm(D)/ 8.4Kg | |||
| STANDARD ACCESSORIES | ||||
| Power Cord(10A) | ×1 | |||
| Fuses | ×3 (Including a spare contained in the fuse holder) | |||
| Hipot Test Lead ,1.5m(1101) | ×1 | |||
| Hipot Return Lead ,1.8m(1102) | ×1 | |||
| *product specifications are subject to change without notice. | ||||
