批量供應HP8970B噪聲測試儀HP8970B+346A HP8970B

==================================
東莞市飛宇電子有限公司
聯系人: 魏小姐
手機:81
電話:
傳真：
QQ客服：
EMAIL：
東莞市塘廈鎮迎賓大道旁富康豪庭144號
===================================

hp8970b描述
Agilent 8970B噪聲系數測試儀解開了噪聲系數測量的神秘面紗，使測量變得更加容易、且可重復進行。而且它可與346或347系列噪聲源一起使用。憑借較低的儀器不確定性和自動的第二階段修正功能，即使對于低增益設備，8970B也能夠生成的噪聲系數讀數。該儀器為混頻器測量提供了專用的測量模式，而且可以控制外置本地示波器和8971C噪聲系數測試裝置。

同時測量噪聲系數和增益
放大器和頻率轉換設備的簡單鑒定
1年的標準保修期
如欲了解詳細信息，請點擊產品概述鏈接
HP8970B  噪聲系數(增益)測量范圍：0~30dB(-20~至少40dB)
噪聲系數(增益)測量范圍：0~30dB(-20~至少40dB)
HP8970B噪聲系數(增益)儀表的不確定度：在0~55℃(±0.15dB)±0.1dB
噪聲系數分辨率： 0.01dB (經GPIB控制時為0.001dB)
HP8970B增益分辨率： 0.01dB (經GPIB控制時為0.001dB)
頻率范圍：可從10MHz調到1600MHz(用選件020時可調到2047MHz)
HP8970B調諧(從10°到40℃)：±(1MHz+頻率的1%)，±6MHz
HP8970B頻率分辨率：1MHz
噪聲系數(對低于-60dBm的輸入功率電平)：＜7dB+0.003dB/MHz (用選件020時為+0.002dB/MHz)輸入駐波比SWR，50Ω參考阻抗;
＜1.7，10MHz~1600MHz (用選件020時，SWR＜1.8)
＜2.0，1600MHz~2047MHz(只用選件020)
工作輸入功率：-10dBm
HP8970B外部?jī)粼鲆妫?gt;65dB(在噪聲源與8970B RF輸入之間)
噪聲源驅動電壓：28.0±0.1V
工作溫度： 0°~55℃
儲藏溫度： -55°~75℃
電源：220或240V(+5%，-10%);48~66Hz，150VA(值)
尺寸：425mm(寬)×143mm(高)×476mm(長)
重量： 凈重，15.5kg
HP8970B HP8970B  HP8970B
HP346B 噪聲源：10MHz-18GHz (選件001）

346B Noise Source option 002 and special option H72 Discontinuance Notice: The
Agilent 346B noise source Option 346B-002, and special Option 346-H72, noise
sources which use an APC-7.0 mm connector, will be discontinued on October 31,
2003. This will also be that last day to order these options. The support life
will be 5 years (until 31st October, 2008). There is no Agilent recommended
replacement.

The Agilent 346B noise source is the ideal companion to Agilent's noise figure
solutions. Since it is broadband (10 MHz to 18 GHz), it eliminates the
necessity for several sources at different frequency bands. The low SWR of the
noise source reduces a major source of measurement uncertainty; reflections of
test signals. The 346B's high ENR, low SWR, and variety of connectors make it
a general-purpose noise source. Add special option H01 for high ENR (21 dB
typical) to measure high noise figure devices, or option H42 for measuring
Direct Broadcast Satellite (DBS) low noise block converters.
特性
Low SWR for reducing noise figure (NF) measurment uncertainty
Individually calibrated ENR values at specific frequencies to enhance accuracy
Calibration supplied on floppy disk for easy loading into NFA-series noise
figure analyzers
1 year standard warranty
For complete details click on the Noise Figure Selection Guide link
Frequency Range:10 MHz - 18 GHz
Noise Figure Range:14 dB - 16 dB
Available Options
Option         Description               
001      Type N (male) connector             
002      APC-7 connector                     
004      Type N (female) connector           
8ZE      Refurbished equipment              
910      Extra operating manual(s)