Description: Ultra-Precision Compact Linear Stage, Y stage, Includes board and cable

有英制和公制之分

2PM500-1L/1V Series
Key Features
Manufactured to the highest quality standards, the PM500 mini series stages
deliver unmatched performance in a very compact design
High-quality, long length crossed-roller bearings ensure highly accurate linear
motion with excellent load capacity, stiffness and lifetime.
Precision mounted, low-thermal expansion glass scale warrants 0.75 μm accuracy
with repeatability as good as 0.05 μm
Very low friction lead screw provides exceptional smooth motion with high
damping
The PM500-1L/1V Stages are the ideal foundation for especially demanding
fabrication processes like fiber pigtailing, ballbonding, micro-ablation, scanning and
controlled optical exposure. Like all PM500 stages, they offer the most accurate and
repeatable motion available from an off-the-shelf modular stage. These stages may be
mounted in any orientation and are cleanroom friendly with operation to Class 0.1.
Despite being smaller than most manually driven 25 mm travel stages, these minitravel
stages provide all of the reliability, robustness and durability that make the PM500
stages the industry leaders. A high-torque DC motor runs smoothly in a fully-internalized
space saving design. All critical reference surfaces are precision-ground to maintain
superior flatness and straightness of travel. The result is a motion system with unmatched
laboratory-grade quality and performance with production line reliability. And like all
PM500 Series stages, the PM500-1L/1V Series incorporates direct-output metrology to
deliver outstanding dynamic performance.
A linear glass scale attached to the moving table eliminates all of the drive train
errors not measurable when the encoder is attached to the motor. The scale is mounted
on a precision-ground reference surface to ensure alignment with the stage s axis of
motion, eliminating possible cosine errors and providing better than 0.75 μm accuracy
over full travel. The scale incorporates a fiducial track for reading absolute origin
position. A propriety non-contacting head eliminates hysteresis and wear.
The stages are built from high-strength stress-relieved aircraft 7075 aluminum and
incorporate high-quality crossed-roller bearings with approximately 75% more bearing
length to travel than for typical stages which provide excellent stiffness, load capacity
and lifetime for demanding high duty applications. Combining this with low friction
preloaded lead screw assembly and cool running DC motor drive provides reliability
better than 20,000 MTBF.
Design Details
Base Material Stress-relieved 7075 Aluminum
Bearings Crossed roller bearings
Drive mechanism Very low friction lead screw
Drive Screw pitch(mm) 1
Feedback Propriety glass scale encoder
Limit Switches Optical, on encoder s fiducial track
Origin Optical, on encoder s fiducial track,
located at center of travel
Motor Cool running DC servo motor with
Tachometer
Cable 4.8 m long cable included
Driver Module Driver module with on-board
processing power PM500-C6
included (axis controller)
MTBF@30%rated load(h) 20,000
Weight[lb (kg)] PM500-1L(M-PM500-1L) 2.2(1)
PM500-1V(M-PM50001V)6.6(3)
Specifications
Travel Range (mm) 25
Resolution (μm) 0.05, 0.025
Minimum Incremental Motion (μm) 0.05, 0.025
Bi-directional Repeatability, Typical 01, 0.05 typical
Absolute Accuracy (μm) 0.75 typical
Speed Range 0.01 μm/s to 50 mm/s; 25 mm/s(PM500-1V)
Speed Regulation +/-1% RMS typical above 10 μm/S
Acceleration Range (g) 0.001-0.25
Normal Load Capacity (N) 40
Straightness/Flatness 0.75 μm
Note: At the high level of precision in which this stage operates, there are many factors
that can impact performance in a specific application, including: temperature and
humidity control, seismic vibration control, flatness of mounting surface, and stage stack
configuration. As such, it may be difficult to verify specifications such as bi-directional
repeatability and minimum incremental motion in every application.
Configuration Information
How to configure PM500-1L/1V PM500-1
M-in prefix for Metric
Leave blank for English Resolution
Motion Direction
100nm
L for horizontal 50nm
V for vertical 25nm
The PM500 series stages are configured by first specifying English or metric threaded
holes, and then specifying the horizontal or vertical stage version and the resolution in
nanometers. For example, the M-Pm500-1V.25 is a metric vertical stage with 0.025 μm
(25nm) resolution
X X XXX
Dimensions:

They are built in either a Metric or English version. These are the mounting holes on the top of the Mini Z I will quote you both (they are the same price) and you will need to make a decision on this.

Also the stage comes standard with the axis card and cable which is tuned to the Mini Z. This is the electronics card that is installed in the controller. This is not the complete controller but the axis card only to run the Mini Z.

P/N: PM500-C6
Description: Precision Motion Controller/Driver for PM500 Series
P/N: PM500-1A.100
Description: Ultra-Precision Motorized Actuator, Angular stage actuator, Includes board and cable
P/N: M-PM500-4L.50
Description: Ultra-Precision Linear Stage, X stage, Includes board and cable
P/N: M-PM500-4LS.50
No Picture
Description: Ultra-Precision Linear Stage, Z stage, Includes board and cable
P/N: M-PM500-1V.50
Description: Ultra-Precision Compact Linear Stage, Y stage, Includes board and cable
P/N: Model 6000
Description: Laser Diode Controller
P/N: 2832-C
Description: Dual-Channel Optical Power Meter
P/N: Model 818-IS-1
Description: Universal Fiber Optic Detector
P/N: 23950-01/03
Description: Computer
P/N: HI18
Description: Hard Drive, 18 GB
P/N: 23755-01
Description: UPS 120 VAC
P/N: 26383-01
Description: Cross Hair Generator
P/N: 24993-01
Description: Protection key
P/N: 30-2500-00
Description: Fiber Optic Illuminator, 150 W 115 V, 60 Hz
P/N: 50-2512-00
Description: Bulb, Halogen for Fiber Optic Illuminator
P/N: 29598-01
Description: Fiber Optic Illuminator, 110/220 V
P/N: 10-1778-00
Description: Monitor, 14” Pelco, 220 V
P/N: 10-1723-02
Description: Monitor, 13” Color
P/N: 29320-01
Description: Cable, Fiber bundle illuminator, 20 ft.
P/N: WG-16-DEV
Description: Waveguide gripper
P/N: WG-16-ARRAY
Description: Fiber array gripper

發票：繼電器、馬達類，涉及到進口商檢及3C的限制。如果金額小，我們將通過香港進口到大陸。報價不開發票，如需17%VAT票，需加20%。

交貨期：

（1）      通過香港：歐美有貨的情況下，通過香港3-10天交貨，視貨物輕重及廠家（代理）物流效率。

（2）      深圳機場：歐美有貨的情況下，通過深圳機場報關，10-20天。

（3）      超大、超重、超長貨物具體情況具體分析。

付款方式：預付貨款

質量：本公司貨源均來自原廠或其指定代理商。拒絕假貨，就是對假貨的打擊！

包裝：由本公司發出的貨物，均有足夠大的包裝及填充物。超大、超長、超重具體對待。

深圳市灣邊貿易有限公司
電話:+ 6601
傳真:+ 6602
電子郵件：info@coastaltrading.com.cn
www.coastaltrading.com.cn