光學系統Optical system
- 譜線Optical lin
- 控制、電子采集和數據讀出系統Control, Acquisition Eleronics and read out system
- 火花源Spark Source
- 火花臺Spark Stand
- 軟件Software
- 控制中心：電腦Control station : computer
組成部分的描述：
DCRIPTION OF THE COMPONENTS:
- 光學系統OPTICAL SYSTEM
v 多塊CCD檢測器系統，根據應用需要多達16塊CCD檢測器
Multi High Rolution CCD Multi deteors (Charge Coupled Device) system with up to 16 CCD solid state deteors depending on the application
v 每塊CCD 3,648像素
Each CCD has 3,648 aive elements (pixels equivalent)
v 58,368像素的分辨率(16 x 3,648像素)
Rolution of full range 58,368 aive elements (pixels) (16 x 3,648 pixels)
v 全息衍射光柵，光柵刻線1200或2700或3600條/mm
High lumisity holographic grating with 1200 or 2700 or 3600 groov per mm
v 溫度穩定系統
Stabilized against fluuations in temperature
v 采用材料應對漂移
Special material for drift free
v 焦距：500 mm
Focal length 500 mm for all optical systems
v 譜線波長：140 - 800 nm由衍射光柵的選擇決定。光柵的選擇由制造商根據分析元素和分析程序來決定
Speral optical wavelength 140 – 800 nm depending on seleed diffraion grating. Grating seleion is made by manufaurer depending on ytical programs and elements
v 全光學系統自動描跡
Automatic profiling full optical system
v 密閉的真空光學室可以避免灰塵、光線的干擾
Vacuum tight optical chamber sealed against light and dust
- 譜線OPTICAL LIN
v SCP覆蓋了全元素分析范圍，可根據具體需要分析相應的元素
SCP can be equipped with all the needed speral lin basing on ytical programs requted
v 光學系統包括固態檢測器能夠測量樣品所發出的全譜
Optical system includ full range multi-chanel CCDs solid state deteors able to measure the whole optical spera emitted by all elements in the sampl
v 并且為將來可能的升級，增加分析線（元素）方便
It’s always possible to integrate new speral lin (elements) for future upgrade
v 可現場增加分析程序
Possible on site addition of ytical programs
- 控制、電子采集和數據讀出系統CONTROL, ACQUISITION ELERONICS and READ OUT
v 電子系統具有微處理器控制的多通道積分和數據系統采集功能
Eleronic system with integrators multi-channels and Data System Acquisition PC controlled by microprocsor
v 16位模數轉換器
High speed 16 Bit ADC
v ISP混合信號Flash微控制器100MHz
Mixed Signal ISP Flash MCU 100 MHz
v 多種連接源
Serial Source Interface
v 讀出及U借口支持快速數據控制與處理系統
High speed readout with high speed interface U for fast data procsing and controlling the system
v 多16塊CCD模塊，由制造商根據應用情況選擇
Up to 16 input for CCD modul. CCD modul seleed by manufaurer
- 火花源SPARK SOURCE
v 全自動控制火花源
Full automatic controlled source
v 半導體控制放電激發
Solid state spark source semiconduor controlled.
v 1到100 A等離子體電流
Plaa current from 1 to 100 A
v 放電參數由保護
The discharge parameters are proteed by pword
v 的分析要求可有不同的激發參數
Variable discharge parameters for individual ytical tasks
v 火花光源放電穩定，不受供電系統波動的影響
The spark source is stabilized against variations of the power supply
v 激發參數由激發線和分析程序標定和控制
Excitation parameters configurated and controlled according to excitation lin and ytical programs
v 火花源可有多種參數設置
Spark source with variable parameters
v 火花頻率: 200到to 1000 Hz (可控)
Spark Frequency: 200 up to 1000 Hz (controllable)
v 火花持續時間10-10000 us (可控)
Spark time 10-10000 us (controllable)
- 火花臺SPARK STAND
v 開放式的火花臺可以分析測試重達20Kg的各種形狀的樣品
The open universal spark stand allows to yse sampl up to 20 Kg and suitable for sampl in different forms
v 電易于拆卸維護
The elerode is easily removable for maintenance
v 氬氣吹掃火花臺，低氬氣消耗
Argon flushed spark stand with minimum consumption of Argon
v 使用便捷的樣品夾支持快速樣品更換
Quick change with simple digned sample clamp for fast sample throughput
v 不同樣品的適配器可滿足各種樣品的需求（可選）
all adapters for different sampl are also available for various kind of sampl(options)
