詢價
- 企業類型：貿易商
- 原產地：BURKERT
寶得6013型直動式電磁閥，德國BURKERT6013電磁閥
The direct-acting proportional valve Type 2835
can be used as a control valve for process control
and is suitable for technical vacuum. Low
hysteresis, high repeatability and high sensitivity
ensure superior regulation behavior. Thanks to
an elastomeric sealing, the valve closes tightly
Valve control takes place through the control
In continuous fl ow applications, the choice of appropriate valve
size is much more important than with on/off valves. The optimum
size should be selected such that the resulting fl ow in the system
is not unnecessariy reduced by the valve. However, a suiffi cient
part of the pressure drop should be taken across the valve even
recommended value: Δpvalve > 30 % of total pressure drop
For that reason take advantage of Bürkert competent engineering
services during the planning phase!
Body material Brass, Stainless steel
Seal material FKM, EPDM on request
Media Neutral gases, liquids
Medium temperature -10 ... +90 °C
Duty cycle 100 % continuously rated
Port connection G 3/8, G 1/2, NPT 3/8, NPT 1/2
Electric connection Cable plug (DIN EN 175301-803 Form A)
Installation As required, preferably with actuator in upright position
The direct-acting proportional valve Type 2835
can be used as a control valve for process control
and is suitable for technical vacuum. Low
hysteresis, high repeatability and high sensitivity
ensure superior regulation behavior. Thanks to
an elastomeric sealing, the valve closes tightly
Valve control takes place through the control
In continuous fl ow applications, the choice of appropriate valve
size is much more important than with on/off valves. The optimum
size should be selected such that the resulting fl ow in the system
is not unnecessariy reduced by the valve. However, a suiffi cient
part of the pressure drop should be taken across the valve even
recommended value: Δpvalve > 30 % of total pressure drop
For that reason take advantage of Bürkert competent engineering
services during the planning phase!
Body material Brass, Stainless steel
Seal material FKM, EPDM on request
Media Neutral gases, liquids
Medium temperature -10 ... +90 °C
Duty cycle 100 % continuously rated
Port connection G 3/8, G 1/2, NPT 3/8, NPT 1/2
Electric connection Cable plug (DIN EN 175301-803 Form A)
Installation As required, preferably with actuator in upright position
