| CLEARING TIME | |||||||||
| 熔 斷 時 限 | |||||||||
| 電流Ampere | 100% Rating | 135% Rating | 200% Rating | ||||||
| 時間Time | ＞4h | <1h | <120s | ||||||
| 電壓Volfage | 250v | 250v | 250v | ||||||
| 5.機械特性Mechanical Properti:Terminal Conncctions&Lead Solderability | |||||||||
| 乃經下述三項 | |||||||||
| 5.1拉力強度Terminal Strength:當施加軸力向拉力1.1磅于兩端導線（或套蓋）5分鐘后， | |||||||||
| 無松動或損壞現象發生。 | |||||||||
| 5.1Leads and/or caps are soldcred(adhcred)to withstand axial pulling force1.1pounds5 | |||||||||
| min without loosening ou any harfulns to firmly arlachment | |||||||||
| 5.2 回轉強試Torsion Strength: | |||||||||
| |||||||||
| After being subjecteedd to720 g/cmtorsion go one cap while te othe terminal fixed, any | |||||||||
| damage or looning rulted | |||||||||
| |||||||||
| 發生損壞 | |||||||||
| One lead bent through90o,the body be clamped and rotated through 360o at a rate or 5 sec | |||||||||
| about the original axis,Vophisical damage to leads or connections twsulted after 3 succsive | |||||||||
| -altematero-tations. | |||||||||
| 5.3 彎折強度Bending Strength:導線經過兩次反方向之彎折后（彎折90度同折回原位謂之 | |||||||||
| 彎折）不發生損壞 | |||||||||
| After two bends of opposite ditections (bending through an angle of90oand back is detined as | |||||||||
| one bond)of lead, damage are to be visualized. | |||||||||
玻 管 式 保 險 絲
Fuscs for Instrumcnt,Power and Telephone (nindicating)
1.適應范圍:本標準試用于保護儀器,各類電子電器元件,電源供應器和電話機用之玻管式熔斷保險絲
1.Available Ramge:For protccting instrurucnts,all electron or electonal,power supplics and telephone sets.
2.形狀及尺寸如下圖，單位：mm
2.Shape&size as following illustrations,unit:mm
2.1構造形狀Structurc&Shape如上圖 1as shown in ligure above
5mm X 20mm formall called
2.2額定電壓 Rated Voltage: 250V AC. 250V
2.2額定電流 Ratde Current: 150MA-15A 慢熔
Parr Name 部 名 Material 材料 Size 尺寸
A Ferrule Cap 套合（銅帽） Capper(inckel plaring)銅（鍍鎳） 5.16*5.25
B Tube 銅管 "Soda Gl (transparenl)
石灰玻璃（透明）" 4.7x19.1mm
C "Fuse Soluble Eloment
可熔體" Siler Alloy 銀合金線
D Adhive 粘膠 "Rin &Hardening Agent
樹脂與硬劑"
E Solder 焊錫 "Naught Lead Tin
無鉛錫"
F Pig 引線 Capper Plaring Tin 銅鍍錫 0.65x38x5.85
3.材 料：
3.Material
3.1 玻管本體：透明玻璃管可清晰見到內部之熔線但不可破裂或變形
3.1 Gl tube:Transparenr gl in which the fuse is clr and pwspcctable. breaking or deformation
is allowed.
3.2 兩端銅帽：須以導電率良好之黃銅底材料。
3.2 Two br end caps Made of br of good conductiviry.
3.3 銅帽處理：銅帽部分鍍鎳
標示后若加"3"者，表示須鍍鎳。
3.3 Coating of br caps Plaring the surfacc with nickel If the indicarion is added with"s",it needs
to be plard with silver.
3.4 銅蓋強度：銅蓋和玻璃本體間的扭力小720g-cm.
3.4 Slrcmgth of br caps The minimum tortion between br caps and gl tube is 720g-cm
4.電氣特性：
4.Charactcristics of Electrical Appliancos
4.1 負載容量：額定電流測100%，能繼續通電熔化現象。
4.1 Loading Capacity The Listed Electrical.(Included) add 100%for following,and it's available to let
Current Kurrcnt Keep on flowinng without any melding
4.2 溫度特性：進行上項測試1.5 小時，后繼續維持原加之電流，每隔十分鐘測試，繼續測試
三次，溫度不得升高，若使用熱偶式測量方法，（Thermometer method)則本體溫度在70℃以下
若使用溫度計測量方法（Thermometer method)則在50℃以下。
4.2 Temperature proceed: the prccedingtt for1.5 hours,keep tting iteith the original current
every 10 minut.Continue to tt it for 3 tim .The temperature is t allowed to be higher