詢價
NACHI遙控溢流閥型號說明,不二越遙控溢流閥價格
C pressure control valve and remote control valve piping,
the piping volume will produce vibration,
It is recommended to use a thick-walled steel pipe with an inner diameter of 4 mm or less and a length of m.
V When the pressure regulator needs to adjust the bolt, add "K" to the model.
壓力調節時，扭松鎖緊螺母，將手
柄向右轉動，壓力上升，向左轉動壓力下降。
The relief valve belongs to the balance piston type, its coat
There is a wet solenoid valve, which constitutes the hydraulic
Unloading circuit of the device.
W This type is built to prevent vibration when unloading
part. At the same time, in the vacuum circuit can also be made
Use, the maximum value of its adjustment time is 3 seconds left
right. (Please refer to the use of decompression circuit example)
通過連接溢流閥，減壓閥等平衡活
塞型壓力控制閥的遙控口，可以容易地進行遙控。
w RCD型也可以作為直動型溢流閥使用。
By connecting the relief valve, pressure relief valve and other balance live
Plug-type pressure control valve remote control port, you can easily remote control.
W RCD type can also be used as a direct acting relief valve.
x 泄油口背壓請?jiān)O(shè)定0 . 2 M P a{2kgf/cm2}以下。
c 壓力控制閥和遙控閥配管時，由于配管容積會產生震動，
建議使用內徑為4mm以下厚壁鋼管、長度為m以內。
v 壓力調節部需要調整螺栓時，在型號規定處增加“K”字母。
NACHI遙控溢流閥型號說明,不二越遙控溢流閥價格
