| 品牌 | SKF | 型號 | LAGM 1000E |
| 類型 | 容積式流量計 | 測量范圍 | 6（m3/h） |
| 等級 | ±3% from 0 - 300 bar | 公稱通徑 | n.a.（mm） |
| 適用介質 | NLGI 0 - NLGI 3 | 工作壓力 | 70（MPa） |
| 工作溫度 | n.a.（℃） |
SKF LAGM 1000E 潤滑脂流量計
計量潤滑脂用量
在使用潤滑脂加注槍或泵手動潤滑軸承時，一般很難確定潤滑脂的正確用量，這可能造成潤滑的過度或不足。對軸承的使用壽命造成負面影響，從而可能導致機器故障。
SKF潤滑脂流量計LAGM 1000E可測量出脂量，以公制（cm³ 或g）和美制單位（US fl. Oz或oz）表示。它的耐壓高達70MPa，使它成為與許多類型的潤滑脂加注槍或泵組合使用的理想選擇。
■ 顯示加注潤滑脂的體積或重量，無需進行單位換算
■高地地為軸承加注潤滑脂，降低潤滑過度或不足的風險
■適用于稠度等級至NLGI 3的所有SKF軸承潤滑脂
■防油、脂的橡膠套保護電子裝置，防撞擊
■帶背光的LCD顯示，便于讀數，有“電量低”的提示
■體積小、簡潔而重量輕的設計，僅重0.3 kg
■抗腐蝕的鋁制外殼封裝
■易于安裝和使用
技術參數
 | |
| 訂貨號 | LAGM 1000E |
| 外殼材料 | 氧化鋁 |
| 重量 | 0.3 kg |
| IP防塵防水等級 | IP 67 |
| 適用潤滑脂 | NLGI 0 - NLGI 3 |
| 工作壓強 | 70 MPa |
| 潤滑脂流量 | 1000 cm³/分鐘 |
| 螺紋接頭 | M10 x 1 |
| 顯示 | 亮的LCD |
| ： | ±3% ，0 - 300 巴 |
| ±5% ，300 - 700 巴 | |
| 可選擇的單位 | cm³、g、US fl. oz 或oz |
| 顯示燈自動關閉 | 上脈沖后15秒 |
| 電量不足 | 顯示提示 |
| 電池類型 | 1.5 V LR1 （2節）堿性電池 |
| 自動關閉 | 上一個脈沖后1分鐘 |
Grease meter LAGM 1000E
Accurate grease quantity measurement for adequate lubrication
It is generally difficult to determine the correct quantity of grease when manually lubricating bearings, either using a grease gun or pump, which can result in either over- or under-greasing the bearing.
That can negatively influence the bearing's service life and possibly result in machine breakdown.
The SKF grease meter LAGM 1000E accurately measures grease discharge in volume or weight, in both metric (cm³ or g) and US units (US fl. oz or oz). It has a high maximum pressure of 70 MPa
(10,000 psi), making it ideal for use in combination with many
types of grease guns and pumps.
■Measures grease discharge in volume or weight, making conversion calculations unnecessary
■High accuracy facilitates adequate bearing lubrication, reducing the risk of over- or under-greasing
■Suitable for all SKF bearing greases of consistency classes up to NLGI 3
■An oil and grease resistant rubber sleeve protects the electronics in case of impact
■The backlit LCD displays large and clear-to-read digits, including "low battery" indication
■Small, compact and lightweight design - only 0,3 kg (0.66 lb)
■Corrosion-free aluminium housing
■Easy to install and use
Technical data
| Designation | LAGM 1000E |
| Housing material | Aluminium, anodised |
| Weight | 0,3 kg (0.66 lb) |
| Max. flow | 1.000 cm³/min (34 fl oz./min) |
| IP rating | IP 67 |
| Suitable greases | NLGI 0 - NLGI 3 |
| Maximum operating pressure | 70 MPa (10,000 psi) |
| Maximum grease flow | 1000 cm³/min (34 US fl. oz/min) |
| Thread connections | M10 x 1 |
| Display | Lit LCD (4 digits / 9 mm) |
| Accuracy | ±3% from 0 - 300 bar |
| ±5% from 300 - 700 bar | |
| Selectable units | cm³, g, US fl. oz or oz |
| Display lamp auto switch off | 15 seconds after last pulse |
| Low battery | Indication on display |
| Battery type | 1.5 V LR1 (2x) Alkaline |
| Unit auto switch off | 1 minute after last pulse |
