Technical Data 技術數據
3 – CCD Chip line colour camera
3 - CCD芯片線型彩色攝像機
Description 說明
The Pellet-Scan-System PS-400C is used for the optical quality control of granules. The system counts enclosed defects, colour aberrations and other contamination in 10 adjustable size classes from 100 µm upwards depending on the required output. It is designed as a control to the production of granules. The inspection of the samples is automatic, whereby the pellets are inspected singularly for their quality. The PS-400C unit consists of a mechanical and a computer part. The mechanical part holds the granules for inspection. It extracts and then separates them, before transferring them to the measurement sensor unit.
顆粒掃描系統PS - 400C用于光學顆粒的質量控制。該系統計數封閉的缺陷，顏色偏差和其他雜物，從100微米開始（大小可調），根據所需的輸出污染種類可分10個檔次。它是專為顆粒的生產過程中控制質量而設計。樣品檢驗是自動的，即顆粒異常的質量檢查。PS - 400C的單元包括機械和計算機部分。機械部分執行對顆粒進行檢查。它們經過到測量傳感器單元之前將被獲蒱，然后把它們進行分選。
The computer part consists essentially of the image-processing unit and hardware which evaluates the images. The user-interface, ie the user dialogue, is via monitor and keyboard. The images are viewed on the monitor. The granule sample is placed in the hopper. From here a mechanical separation device carries the sample of granules to the inspection line, where an image of the material is taken by two cameras from two sides. The image taken is evaluated immediately. Colour aberrations and other contamination are detected. The inspection is carried out with two 3 CCD-chip colour cameras, which is equipped with special optics and lighting devices. The granules are tested in several steps with reference to colour aberrations and the smallest occurring contamination. Thresholds can be defined for specifying results and adjusting the system. The pellets will be graded as 'not in order' if discoloration from within an adjustable discoloration scale and from within an adjustable percentage of pellets are present. The evaluations from the system can be viewed on the monitor.
計算機部分主要包括圖像處理單元和硬件圖像評估。用戶界面，即人機對話，是通過顯示器和鍵盤。圖像在顯示器上觀看。顆粒樣品放置在料斗內，并從這里進入到機械分離設備的顆粒樣品檢測區，這里由兩個攝像機，從上下兩個方位對物料進行的快速掃描攝取。對拍攝的圖像進行評估，實現對色差和其他污染檢測。攝像機配備了兩個3彩色攝像機的CCD芯片，這是具有特殊的光學和照明設備的配置。顆粒測試與參考色像差和發生污染的界定可以用小的幾個設定步驟來完成。界限可以被定義（設定）為指定的結果，并調整系統 。顆粒色差（設定）為“不受限制”，從軟件系統內可調變色范圍和可調顆粒變色比例。系統的評價（設定）效果，可以在顯示器上查看 。
艾麥思（上海）儀器科技有限公司
3 – CCD Chip line colour camera
3 - CCD芯片線型彩色攝像機
| Resolution: 分辨率 | 3 x2048 pixel 3 x2048像素 |
| Spectral range: 光譜范圍 | 400nm- 1000nm |
| Lens mount: 鏡頭卡口 | F-Mount F型卡口 |
| Line frequency: 線頻率 | 19 kHz |
| Pixel dimensions： 像素尺寸 | 14 x 14 µm |
| Video output: 視頻輸出 | Camera Link, 3 x 8 Bit each pixel 相機連接，每個像素3 x 8位 |
| Min. sensitivity: 小靈敏度 | -3 db -3分貝 |
| Video SN: 視頻SN | better than 58 db 優于58分貝 |
| Power consumption: 消耗功率 | 12 W 12瓦 |
| Working temperature: 工作溫度 | 5 to 40ºC |
| Shock/Vibration resistance: 抗沖擊/震動能力 | 50G / 11 - 200 Hz |
| Lighting unit 照明裝置 | ||
| Controlledfluorescent 控制熒光燈 | ||
| Illuminator lighting source in chamber : 在腔內照明光源 | 28 x 18 W | |
| General data 常規數據 | ||
| Camera resolution: 攝像頭分辨率 | from 100 µm 從100微米起 | |
| Weight of Mechanical part： 機械部件的重量 Power supply： 電源 Instrument air ： 儀表空氣 Material output: 材料處理能力 | Approx. 500 kg 約500kg 230V AC, 16A 50-60 Hz 6 bar Up to 800 kg/h depending on the material 高達800公斤/小時，視物料情況 | |
| Computer dimensions: 電腦尺寸 | 19" 4 HE 19“4 | |
| Dimension mechanical part: 外型部分的尺寸 | 1500 x 1000 x 400 mm³(W,H,D) | |
| Power supply: 電源 | 230 V AC 50-60 Hz | |
| Weight: 重量： | approx. 70 Kg 約70公斤 | |
Description 說明
The Pellet-Scan-System PS-400C is used for the optical quality control of granules. The system counts enclosed defects, colour aberrations and other contamination in 10 adjustable size classes from 100 µm upwards depending on the required output. It is designed as a control to the production of granules. The inspection of the samples is automatic, whereby the pellets are inspected singularly for their quality. The PS-400C unit consists of a mechanical and a computer part. The mechanical part holds the granules for inspection. It extracts and then separates them, before transferring them to the measurement sensor unit.
顆粒掃描系統PS - 400C用于光學顆粒的質量控制。該系統計數封閉的缺陷，顏色偏差和其他雜物，從100微米開始（大小可調），根據所需的輸出污染種類可分10個檔次。它是專為顆粒的生產過程中控制質量而設計。樣品檢驗是自動的，即顆粒異常的質量檢查。PS - 400C的單元包括機械和計算機部分。機械部分執行對顆粒進行檢查。它們經過到測量傳感器單元之前將被獲蒱，然后把它們進行分選。
The computer part consists essentially of the image-processing unit and hardware which evaluates the images. The user-interface, ie the user dialogue, is via monitor and keyboard. The images are viewed on the monitor. The granule sample is placed in the hopper. From here a mechanical separation device carries the sample of granules to the inspection line, where an image of the material is taken by two cameras from two sides. The image taken is evaluated immediately. Colour aberrations and other contamination are detected. The inspection is carried out with two 3 CCD-chip colour cameras, which is equipped with special optics and lighting devices. The granules are tested in several steps with reference to colour aberrations and the smallest occurring contamination. Thresholds can be defined for specifying results and adjusting the system. The pellets will be graded as 'not in order' if discoloration from within an adjustable discoloration scale and from within an adjustable percentage of pellets are present. The evaluations from the system can be viewed on the monitor.
計算機部分主要包括圖像處理單元和硬件圖像評估。用戶界面，即人機對話，是通過顯示器和鍵盤。圖像在顯示器上觀看。顆粒樣品放置在料斗內，并從這里進入到機械分離設備的顆粒樣品檢測區，這里由兩個攝像機，從上下兩個方位對物料進行的快速掃描攝取。對拍攝的圖像進行評估，實現對色差和其他污染檢測。攝像機配備了兩個3彩色攝像機的CCD芯片，這是具有特殊的光學和照明設備的配置。顆粒測試與參考色像差和發生污染的界定可以用小的幾個設定步驟來完成。界限可以被定義（設定）為指定的結果，并調整系統 。顆粒色差（設定）為“不受限制”，從軟件系統內可調變色范圍和可調顆粒變色比例。系統的評價（設定）效果，可以在顯示器上查看 。
艾麥思（上海）儀器科技有限公司
