濟南仕壯機電設備有限公司生產模內貼標機，貼標合格率100%，20年技術沉淀,10天試機，技術培訓，技術支持，歡迎來電咨詢。

濟南仕壯機電設備公司是生產模內貼標機，測漏機，輸送帶，旋蓋機，削口機，有數十年的模內貼標機生產經驗。

1              summarize

Strong-MT-II Specification：
It is a machine of Labeling In Mold .It is aim at various Automatic Blow Molding Machine at home and abroad, make use of nowadays international latest technique and the independence develops .This system adopts stand PLC and touch screen that reach a high performance, make the system run more stabilize , operate more simple and direct .            

Its characteristics is as follows:

l    The open te program design makes its adaptability more wide, that can connect with more model Automatic Blow Molding Machine ;

l    This machine adoption touch screen, the operation language can choose;

l    The operation is more simple, arbitrarily the location breakup, that can raise efficiency further;

l     Adopt an C technique;

l    Adopt the servo drives system;
l    Adopt Schneider &. OMRON electric device;
l    The system operating state and all input /output informations show at a screen directly ;
l    Have protection and can carry on various function setups;
l    This machine has procedure from the diagnostic system.

Its parameters is as follows:

l    External appearance(length× breadth× high):

                         1750mm×950mm×1450mm                                                                                                          

l    Journer:                 1100mm

l    Max. speed:              3000r/min

l    Number or control axis:     x axis and z axis

l    Max. breadth:             517mm(adjustable)

l    Min. breadth:             275mm(adjustable)

l    Consumer power:          1.1KW

l    Power supply                    220V50Hz