• Feasa LED測試儀的使用Using the Feasa LED Tter(yser)：

 目前LED檢測的方法有分析儀和人工目測，儀器配置多、成本高、，對使用者的要求高，主要面對大型企業的研發部門；一些技術實力和資金有限的小型企業普遍采用人工目測的方法，其缺點顯而易見，對檢測人員的經驗有所要求，工作量大，容易視覺疲勞，導致漏檢和誤判，終導致效率低下。

Feasa LED測試儀可以充分發揮在PCBA組裝制程控制中的作用，在組裝有LED的PCBA生產過程中，通過對標準品PCBA的LED的顏色和亮度進行學習，讀取一個相對值作為標準值，并設置標準值的上下限，然后批量讀取待測PCBA上的LED相對值與標準值進行比對，從而判斷良品和不良品，地測試測，結合I在線測試和功能測試，不用增加測試工位，了效率，快速、全自動化，避免人為漏判。

Feasa LED測試儀是一個測量系統，能夠?qū)崿F(xiàn)快速和自動測試LED的顏色和亮度。每個LED分析儀能同時測量多達20個通道的不同顏色和強度的LED光源。從光纖 采集光源，進行測量和分析。該裝置是專為LED和液晶顯示器等設計的自動測試裝置。

The Feasa LED yser is a measurement system that allows fast and automatic tting of both the color and intensity (Brightns) of Light Emitting Diod (LEDs). tting of both the color and intensity (Brightns) of Light Emitting Diod (LEDs). Each LED yzer can simultaneously measure up to 20 different light sourc for Color and Intensity. Light from the LEDs is colleed by Plastic Optical Fibers (POF) and carried to the LED yzer board for measurement and ysis. The unit has been digned for tting LED's and other lighting devic such as LCD Displays automatically.

該分析結果可以通過并行接口、RS232串行接口或U接口讀取，讀回所需信息的時間小于1.5秒，這使得它適合集成在自動測試設備（ATE）。對于過20個 通道的LED測量，可以串聯多個LED測試儀同時使用。

The rult of the ysis can be read out via the parallel interface, RS232 serial interface or U. The time needed to read back the information is ls than 1.5 seconds, which mak it very suitable to integrate in automatic tt equipment (ATE). For applications with more than 20 LEDs multiple LED ysers can be used together.

LED測試儀可用于功能測試 系統和I在線測試系統的應用程序。測試的應用范圍從LED的顯示器和移動電話，汽車照明等，在電子行業生產線檢查系統中也被應用于替代人工視覺。

The LED yser can be used for both Funional tting and for In-Circuit tt applications. The applications range from tting LED’s and Displays in mobile phon, lighting systems in the automobile industry or position checking of eleronics components in produion lin. It has also been implemented in artificial vision applications.

Feasa LED測試儀是一個大，高度，高重復性，適應，使用方便，快速，全自動化LED顏色和強度測量 儀器，廣泛應用于PCB業界和測試設備。

In summary the Feasa LED yser is a powerful, highly accurate, highly repeatable, adaptable, easy to use, fast and fully automated LED color and intensity measurement sensor which has found many applications in the PCB industry on both funional and In-Circuit tt equipment.

• Feasa LED測試儀的優勢Advantag of the Feasa LED yser

>該系統的設計了良好的重復性和顏色的判別。

The dign of the system ensur an excellent repeatability and color discrimination.

 >高度準確地測量LED色彩。

Highly accurate reprentation of the LED color in different color space.

 >安裝方便。

Easy installation.

 >使用1mm的光纖（POF），可輕松地使用現成的工具。

Us 1mm plastic optic fiber (POF) which can be worked on easily using many off the shelf tools.

 >適合用在小空間。

Very suitable for applications where space is at a premium.

 >可以修改LED分析儀傳感器的靈敏度。

Possibility to modify the sensitivity of the LED yser sensor.

 >閃爍和PWM（脈寬調制），也可以進行測試。

Blinking and PWM (Pulse Width Modulation) LEDs can also be tted.

 >串行RS232，I和U接口。

Serial RS232, I and U interfac available.

 >LED分析儀使用的系統，可以測量和測試類型LED的顏色和亮度。

All t, colors and brightns of LED's can be measured and tted using the LED yser system.

 >從2到20個通道，以適應任何類型的應用。

Different versions of the tter, featuring from 2 to 20 channels to adapt it easier to any kind of application

• Feasa LED測試儀的應用Applications of the Led yser

• Feasa LED測試儀的參數SPECIFICATIONS

INTERFAC接口:

注：

1、U接口可以直接為LED測試儀供電，不需要額外提供外部電源。波特率達460800。

Uoffers a very simple interface to the LED yser with requirement for an additional power supply. Very high baud rat, up to 460800 baud, are available.

2、RS232串口波特率達115200，需要額外提供外部電源。

TheRS232 Serial Portis easy to use with a max baud rate of 115200. It requir the use of an external power supply.
 The 20pin I Port can be used in either Frequency Out or Synchrous Serial Mode.

3、Frequency Out應用于RS232串口不能訪問的情況下，用三個頻率表示LED的顏色與亮度。

The Frequency Out protocol can be used where accs to an RS232 Serial Port is t available. Three frequenci are used to reprent the Color and Intensity of the LEDs.

4、Synchrous Serial應用于當使用者的資源受限或者沒有其它端口可供選擇的情況下。

The Synchrous Serial protocol is suitable when tter rourc are limited or other options are available. 

5、Daisy Chain接口可以將多個LED測試儀使用菊花鏈連接器連接在一起，要一個RS232串行端口或U端口連接多達30個LED測試儀。

Multiple LED ysers can be conneed together using the Daisy Chain Conneors. Only one RS232 Serial Port or U Port is required to conne up to 30 LED ysers.

TT TIME測試時間:

測試速度取決于LED的亮度，亮度高的測試時間短，亮度低的測試時間長。根據LED的光強（亮度）同時測試20個LED的時間快達1.2ms。從光纖中讀取數據，平均每根光纖大約5ms。見下面舉例：

The speed of the tt is dependent on the intensity of the LEDs being tted, i.e. Bright LEDs have a shorter Tt Time, Dimmer LEDs have a longer Tt Time. The capture (measurement) of up to 20 LEDs is done in parallel and can be achieved in tim as fast as 1.2ms depending on the Intensity (Brightns). The data is read back from each fiber sequentially and tak approximately 5ms per fiber, for example:

Ultra High Brigh LEDs:

1 LED    ---捕捉時間2ms加上數據讀取時間5ms，總共7ms。

1 LED    ---Capture Time is 2ms and Read Back is 5ms, Total 7ms

20LED's---捕捉時間2ms加上數據讀取時間100ms，總共102ms。

20LED's---Capture Time is 2ms and Read Back is 100ms, Total 102ms

Dim LEDs:

1 LED    ---捕捉時間650ms加上數據讀取時間5ms，總共655ms。

1 LED    ---Capture Time is 650ms and Read Back is 5ms, Total 655ms

20LED's---捕捉時間650ms加上數據讀取時間100ms，總共750ms。

20LED's---Capture Time is 650ms and Read Back is 100ms, Total 750ms

U、RS232端口測試捕捉時間   U / RS232 SERIAL PORT – TT CAPTURE TIM

每根光纖讀取時間一般保持在5ms時間左右。

The Read Back Time per fiber is always approximately 5ms.

I捕捉時間與U/RS232串口相同。但是，數據讀取時間取決于于被測量的頻率。使用安捷倫i3070的讀取的時間大約是400ms至700ms。

For I the Capture Tim are the same as U/RS232 Serial Port. However, the Read Back Tim are dependent on the frequenci being measured. Using an Agilent i3070 the Read Back Tim are 400ms to 700ms approximately.

OUTPUTS輸出:

DRIVERS/SOFTWARE驅動及軟件：

Feasa provid a comprehensive suite of Drivers and Software for ease of use.

In addition, Feasa also provid a number of programm to allow for the most efficient and appropriate use of the yser.

MODEL型號：