ZCM--12232A
*122x16dots 2 lines* Controller LSI built-in * +5V single power supply
EXTERNAL DIMENSIONS AND DISPLAY PATTERN Unit:mm
MECHANICAL DATA | |
Module Size:65.8×27.2×8.5 (5.0) | Effeive Display Area:54.8×18.3 |
Dots Pitch:0.4×0.45 | Dots Size:0.36×0.41 |
Display :122×16 Dots×2Lines | Driving Method:1/32 Duty |
ABSOLUTE MAXIMUM RATINGS | ELERICAL CHARAERISTICS(Ta=25℃,VDD=5V&plun;0.25V) |
Power supply for Logic:0~8V | Input ‘High’ Voltage:(VSS+2.0)~ADD |
Power supply for LCD Driver:0~16.5V | Input ‘Low’ Voltage:VSS ~(VSS+0.8) |
Input Voltage: (VSS-0.3)~(VDD+0.3) | Output ‘High’ Voltage: (VSS+2.4)<Min> |
Operating Temperature:0~50℃ | Output ‘Low’ Voltage:(VSS+0.4)<Max> |
Storage Temperature:-20~70℃ | Power supply Current:1.2mA: |
PIN CONNEION
Pin | Symbol | Lever | Funion | Pin | Symbol | Lever | Funion |
01 | VDD | 5V | Power supply for Logic | 07 | R/W | H/L | H: Read; L: Write |
02 | VSS | 0V | Ground | 08 | A0 | H/L | H: Data; L: Instruion |
03 | V0 | - | Power supply for LCD | 09~16 | DB0~DB7 | H/L | Data bus |
04 | RST | H/L | System Reset | 17 | NC | - | No Conneion |
05 | E1 | H/L | Enable Signal (Slave) | 18 | NC | - | No Conneion |
06 | E2 | H/L | Enable Signal (Master) | - | - | - | - |
|
|
|
|
|
|
|
|
|
| ||||||