1.1適用范圍(Application Range)

此ECH-90W-01是一款寬電壓多點輸出選擇的多功能的電源適配器。

2.產品特點

本適配器的外觀設計新穎、選用優質集成控制電路；制作工藝科學嚴謹精細、產品百滿負荷老化，性能穩定。The Adapter of the machine is novel, quality Integrated circuits control; the production procs was precisens.；100% full load aging，reliable and stable。

3、環境條件(Environment conditions)

  本適配器于室內充電(this Adapter pecially use for indoor)

4、電氣特性(Electric characteristics)

4.1  交、直流輸入特性(AC/DC Input characteristics)

4.1.1         AC Input：AC100V—240V，Frequency 50/60Hz;

4.1.2         MAX. Inputcurrent: 2500mA

4.2輸出特性Output characteristics

4.3*轉接頭附表（兩種類別選擇其一）

4.3.1在輸出兩端發生短路時，并不會發生火災和任何的危險。當短路被除去后，適配器自動地恢復正常使用。When short circuit occurs at the two output ends, there will be no fire or any danger.

When the short circuit is removed, the adapter is rtored to be in normal operation.

5.1 *高溫測試High temperature tting

實驗溫度為65℃&plun;2℃，產品不包裝，持續時間為5小時。在常溫下放置待恢復后對其外觀、緣強度、指示功能及電性能進行重新測試。外觀應平整無劃痕、毛刺以及其它機械損傷，外露金屬部分電鍍層不脫落無銹蝕；無擊穿、飛弧現象；指示功能及電性能正常

Experimental temperature is 65℃&plun;2℃, without package, duration is 5 hours.

Put it in the normal temperature .After recovering, we will tt it again to the appearance, insulation strength, indication function and electrical property.

The appearance should ooth, without scratch, burr and other mechanical damage. At the same time , the plating layer of exposed metallic part will not fall off and no rust ; without the phenomenon of breakdown and electric arcing; it is normal for the indication function and electrical property.

5.2*低溫測試*Low temperature tting

因條件的限制此功能暫未測試。As limited of the condition, this function is not tted temporarily.

5.3 *恒定濕熱測試Constant humid&heat tting

    實驗溫度為40℃&plun;2℃，濕度為90%～95%，產品不包裝，持續時間為48小時。測試后對其外觀、緣強度、指示功能及電性能進行重新測試。外觀應平整無劃痕、毛刺以及其它機械損傷，外露金屬部分的電鍍層不脫落無銹蝕；無擊穿、飛弧現象；指示功能及電性能正常。

Experimental temperature is 40℃&plun;2℃, the humidity is 90%～95%, without package, duration is 48 hours. After tting, we will tt it again to the appearance, insulation strength, indication function and electrical property.

The appearance should ooth, without scratch, burr and other mechanical damage. At the same time , the plating layer of exposed metallic part will not fall off and no rust ; without the phenomenon of breakdown and electric arcing; it is normal for the indication function and electrical property.

5.4*振動測試(Vibration tting)

頻率為10～55Hz，振幅為0.35mm，每個方向上掃頻循環次數為10次。實驗后對其外觀、緣強度、指示功能及電性能進行重新測試。外觀應無機械性損傷，外露金屬部分的電鍍層不脫落無銹蝕，

  指示功能及電性能正常。

Frequency is 10～55Hz,Amplitude is 0.35mm, each direction upward cycle for 10 tim. After experiments, re-tt its appearance, insulation intensity, indication functions and electricity performance. When appearance has not mechanical damage, the exposed metal parts’ plating layer no fall off and no rust corrosion, it shows normal for indirection function and electricity performance.

5.5跌落測試Falling tting

高度為1000mm，實驗臺厚度為20mm的硬木板，6個表面，每個方向1次。實驗后對其外觀、緣強度、指示功能及電性能進行重新測試。外觀應無機械性損傷，外露金屬部分的電鍍層不脫落無銹蝕，指示功能及電性能正常。

the height is 1000mm, experiment Dk is hard board of 20mm, 6 surface, one time for each direction, after experiment, re-tt its appearance, insulation intensity, indication functions and electricity performance. When appearance has not mechanical damage, the exposed metal parts’ plating layer has not fall off and no rust corrosion it shows normal for indirection function and electricity performance.

6.1尺寸（主體）Measure: (main body)

   120.5mm&tim;49.5mm&tim;31.5mm

6.2重量(weight)      G

6.3 AC輸入端為8字座：可以與任意規格的一端是8字的電源線相匹配使用。

6.4外觀(appearance)

    本產品外殼表面無劃傷、批峰、污漬、裂縫，五金無生銹、批峰、劃傷。(Our products’ shell surface no scratch, fluous moulding shell ,bmirch, creve, the metals foil have no rust, fluous metal foils, scratch.)

7、包裝/貯存PACKAGE & STOCK

7.1包裝Package

    包裝方式：紙盒The way of package: Box

7.2貯存Stock

適配器應貯存在環境溫度為-10℃～50℃，清潔、干燥通風的室內，應避免與腐蝕性特質接觸，應遠離火源及熱源。The adapter should be stocked under the temperature -10℃～50℃, in the room of cleanns, dry & airins, don’t touch with the causticy goods , get away from fire and high temperature.

8、注意事項Notice

8.1本適配器于室內充電，請勿將其暴露于雨中或雪中。Don’t expose the adapter in rain or snow. It is only used in room.

8.2請勿分解或組裝適配器。Don’t disemble or emble the adapter by yourself!

8.3請勿使適配器落地或將重物置于其上。Don’t drop the adapter or put the heavy thing onto it.

8.4須在0℃～40℃溫度范圍內使用本適配器。Using this adapter under temperature 0℃～40℃

8.5請勿在直射陽光下、發熱的設備旁或其它高溫場所使用或儲存本適配器。Don’t using or stock this adapter under the direct sunshine, on the side of the hot equipment, or other hot plac

8.6在充電過程中，請勿用如毛巾、衣服之類的物品將適配器掩蓋，避免導致火警。Don’t put the adapter under the towel, clothing, etc, avoiding the fire.

9．產品外形圖：Charger featur.(產品外型以實物為準)