Coil Code | Rated Coil Voltage (VDC) |
Coil Resistance +/- 5% (Ohm) | Must Set Voltage (VDC) * | Must Reset Voltage (VDC) * |
Pulse width (ms) |
Rated Power (W) |
012 | 12 | 24 | 9.3 | 9.3 | 20 to 1000 | 6.0 |
Item |
| FTR-V3 | |
Contact Data | Configuration | 1 form A | |
Construction | Single | ||
Material | Silver-tin oxide alloy | ||
Resistance (initial) | Max. 0.3mOhm at 100A | ||
Switching current | 120A | ||
Max. carrying current | 200A | ||
Max. switching voltage | 440VAC | ||
Max. switching power | 33,240VA (Resistive load 120A-277VAC) | ||
Min. switching load * | 1A, 6VDC (reference) | ||
Max. inrush current | 1,200A | ||
Short circuit | 3kA rms 50Hz to IEC 62053-21 | ||
Life | Mechanical | Min. 200x 103operations | |
Electrical | Min. 1,000 operations 250VAC-120A (resistive load) Min. 1,000 operations 100VAC-120A (resistive load) Min. 120 x 103operations inrush 230A - 1A cut off | ||
Coil Data | Rated Power (at 20 ° C) | 6.0W | |
Max. voltage | 16VDC | ||
Operating temperature range | -40 to +85 °C (no frost) | ||
Timing Data | Operate (at nominal voltage) | Max. 20ms (without bounce) | |
Release (at nominal voltage) | Max. 20ms (without bounce) | ||
Insulation | Resistance (Initial) | Min. 1,000MOhm at 500VDC | |
Dielectric strength | Open contacts | 2,000VAC (50/60Hz) 1min. | |
Coil and contacts | 4,000VAC (50/60Hz) 1min. | ||
Surge strength | Coil and contacts | 12kV / 1.2 x 50μs standard wave | |
Other |
Vibration Resistance | Misoperation | 10 to 55Hz double amplitude 1.5mm |
Endurance | 10 to 55Hz double amplitude 1.5mm | ||
Shock | Misoperation | Min. 200m/s² (11 &plun; 1ms) | |
Endurance | Min. 1,000m/s² (6 &plun; 1ms) | ||
Weight | Approximately 120 g | ||
Sealing | Cat III | ||
